Sony Ericsson Z200 Cell Phone User Manual


 
This is the Internet version of the user's guide. © Print only for private use.
4 Getting started
SIM card and battery information
Always turn off the phone and detach the charger
before you insert or remove a SIM card.
To insert the SIM card and charge the battery
1. Insert the SIM card. Make sure the SIM card is
placed under the silvery holders.
2. Place the battery on the back of the phone with the
connectors facing each other, and push until you
hear a click.
3. Place the back cover into the slots on the phone
and push until you hear a click.
4. Connect the charger to the phone at the flash symbol
with the symbol on the charger plug facing upwards.
5. It may take up to 30 minutes before the battery
charging icon appears in the display.
6. Wait approximately 4 hours or until the icon
indicates that the battery is fully charged. If you do
not see the battery icon after this time, press any key
to activate the display.
7. Remove the charger by tilting the plug upwards.
Turning on the phone and making calls
Your PIN (Personal Identity Number) is provided
by your network operator but not all operators
require a PIN to activate services.
If your PIN starts with the same digits as an
emergency number, for example 112, the digits
are not hidden with an * when you enter them.