T-Mobile 535 Cell Phone User Manual


 
8
Step 5
Confirm the folder where the application should be installed. You can
choose your preferred folder by clicking the
Browse button. Press
Finish button.
Step 6
The application is now installed in your computer. The wizard will
continue with device installation.
Notice:
Now connect the handset to the computer via cabel, bluetooth or
infrared port or insert the PCMCIA card into your notebook!
In some cases the connecting of the device can cause automatic
de
t
ection of the de
vice b
y W
indows. If you are asked to confirm
the installation of s
t
andard drivers (warning regarding the missing
digital signatur
e) conf
ir
m that b
y pressing Yes button!
If you ar
e going t
o ins
t
all GPRS PCMCIA car
d Option Globetrotter
it is necessar
y t
o swit
ch of
f the PIN lock in the SIM-car
d you are
using together with it. The PIN code has to be switched off always
you are using the PCMCIA card together with T-Mobile
Communication Centre (e.g. during GPRS connection
establishing). In case of must to switch on the PIN lock it is
necessary to install the original driver from Option CD – more in
chapter 9. If it is not quite necessary to use the PIN lock we don’t
recommend the installation of the original driver because of
p
ossible problems with some configurations of Windows
operating system. If the PIN lock is switched off the installation
of T-Mobile Communication Centre only is sufficient.
Press Next.
Step 7
The list of supported devices will be shown. If your device purchased
within the sales network of T-Mobile Czech Republic a.s. is not
included in the list, it is possible to upgrade the software by clicking
on Software Update in Settings menu available after clicking on the
button with the key symbol (the link will take you to the page from
which the latest version of T-Mobile Communication Centre can be
downloaded). If you are using an equipment connected through
infrared port, it may be also necessary to use the guide for infrared
port activation in your telephone (see the check box).
Press
N
ext
.