Filter
Top Products
37
ENGLISH
SOLUTION
• Reset the base station by pressing the key on the back of
the base station and try to register again.
• Make sure the power supply is properly connected to the
charging cradle and that the power is on.
• Make sure the batteries are correctly fitted into the handset.
Reset the base station and try to register again.
• Make sure that the power supply is properly connected to
on the base station and that the power is on.
• Move closer to the base station.
• Register the handset.
• Make sure the power supply is properly connected to
on the base station and that the power is on.
• Connect the power adapter of the charging cradle to an
active power outlet.
• Place the handset correctly in the charging cradle.
• Check the position of the batteries.
• Set your Skype status to online.
• Increase the ringer volume.
• Move closer to the base station.
TROUBLESHOOTING
•
For more advanced functionality descriptions you should consult the
User Manual found at www.topcom.net/userguides.php.