Filter
Top Products
4. Enter your access number (up to 20 digits).If you need the
phone to wait before sending the next digits, press
to insert a two-second pause. For a longer
pause, press multiple times. Each pause
counts as one digit.
5. Press when you are finished.
Once you program your access number, press to
dial your voice mail service. For NZ model the Telecom Voice Mail
Access number is pre-programmed into and speed dial
location 4.
Press and hold until you hear a confirmation tone.
KEYPAD LOCKED appears.
If any key is pressed when keypad is locked,
TO UNLOCK KEYPAD PRESS & HOLD *KEY appears.
Press and hold again. KEYPAD UNLOCKED appears.
With average use, your battery talk time will be approximately
8 hours and standby time will be approximately 7 days. For
optimum performance, be sure to return the handset to the
cradle after each call. If the handset is left off of the charging
cradle, the actual talk time duration will be reduced respective
to the amount of time the handset is off the cradle.
[redial/pause ]
[redial/pause ]
[select/ ]
[select/ ]
[select/ ]
To lock the keypad
To unlock the keypad
Keypad Lock
Maintenance
Use Keypad Lock to disable key response.
You can still answer calls, receive page and receive copy
phonebook locations - keylock will reactivate after these operations.
Battery Life
Note:
Do not place the power cord where it creates a trip hazard or
where it could become chafed and create a fire or electrical
hazard.
[*/tone/<]
[*/tone/<]
(14)