Filter
Top Products
Compatible Bases
Installing the Accessory Handset
Installing the Battery
This handset is compatible with Uniden's 2.4 GHz Digital
Expandable phone system: the DSS3415, DSS3455 and DSS3435
series. Visit www.uniden.com.au (Australian model) or
www.uniden.co.nz (New Zealand model) for the most up-to-date list
of compatible bases.
Make sure your package contains the following items. If any
items are missing or damaged, contact your place of purchase.
Follow the steps below to install the
rechargeable battery pack.
1. Using the finger indentation, press in on
the battery case cover and slide it down
to remove it.
2. Plug the battery connector into the
battery compartment jack. Be sure to
match the red and black wires to the label
near the jack.
3. Gently pull on the battery wires. If the
battery connector comes loose, try
connecting it again.
4. Replace the battery case cover and slide
it up until it clicks into place.
Checking the Package Contents
Note: Use only the Uniden BT-909 rechargeable battery
pack supplied with your cordless telephone.
• Cordless Handset • Charging Cradle
• AC Adapter, model #AAD-600S • Rechargeable NiMH Battery
Input: 240V AC 50 Hz Pack, model #BT-909
Output: 9V DC 210 mA Capacity: 600 mAh,3.6V
• Belt Clip • Printed Material
(2)