Filter
Top Products
www.vtechphones.com
36
Answering system operation
Message alert
The message alert function produces an audio tone to remind you that there are new messages on
the answering system.
1. Press
SETUP three times and you will hear “Message alert. To change
the setting, press CHANGE”.
2. Press
CHANGE to conrm the current status (on or off) is also
displayed on the message window.
3. Press
CHANGE again to change the setting.
4. Press
SETUP to save and advance to the next menu option or
press PLAY/STOP /
to save and exit.
When the message alert function is on, the base unit beeps every
10 seconds. The number of messages in the message window ash
when there are new messages. The number in the message window
will glow steadily when there are no new messages.
Announcement only mode
In announcement only mode, callers hear an announcement but cannot leave messages. When
announcement only is turned on, calls are answered with the pre-recorded announcement “We’re
sorry. Messages to this number cannot be accepted”.
Turn the announcement only mode off or on
• Press SETUP four times until you hear “Announcement only. Record no messages. To change
the setting, press CHANGE.”
• Press CHANGE until you hear the option you want (on or off).
• Press PLAY/STOP /
to save and exit.
• In some areas,
tone dial phone
from a remote
location phone
may not function
due to telephone
line conditions
such as line
noise, echo, etc.