ZTE ZTE F152 Cell Phone User Manual


 
32
Set the Owner name
The owner name is displayed on the Idle Screen.
From the Idle Screen press the OK Key for the Main Menu.
Press the Down Arrow then the Left Arrow for Settings, press OK.
Go to 4) for Owner Name.
Type your name and press the OK Key to save.
Disable or change the PIN Number
From the idle screen press the OK key for the Main Menu.
Press the Down Arrow then the Left Arrow for Settings, Press the OK Key.
Press the Right Arrow Key Three times for Security.
Press OK to Select Activate Security Codes.
Press OK to Select PIN code.
Switch ON or OFF and enter the PIN number to confirm.
To change the PIN Number select Change Security Codes.
Press OK to Select PIN code.
Notes on PIN Codes
PIN Code is provided by Telstra.
PIN2 Code is an additional PIN on your (U)SIM card and is not normally used.
Handset Lock is an additional PIN code used when you switch on the phone.
If you forget your Handset Lock code your handset will need to be repaired and you will
lose your content. It cannot be reset after it is locked.