CHANNEL 1
-30 +15
MIN MAX
BASS
MIDDLE
TREBLE
GAIN
-30dB
-30dB
PHONO/LINE
+15dB
+15dB
6
7
8
1
2
3
6
3.1.1 The CHANNEL Section
-. PHONO / LINE Switch
This switch is available on both input channels. You shall
use the LINE position for all high level audio signals such
as CD Players, DAT, MD, etc.. You shall use the PHONO
position to connect the turntables.
1
-. GAIN Control
Via this knob you will adjust the input level. Do not turn
this control too much clockwise or you will overload the
channel, and do not turn it too much counterclockwise
or you will generate background hiss.
2
3.1.2 The MIC/MAIN Section
-. MAIN LEVEL Control
You can adjust the level of the microphone signal via
control.this
7
-. MIC LEVEL Control
This knob controls the overall output volume.
8
-. EQUALIZER Control
Each input channel is provided with 3 bands equalizer:
Treble , Middle and Bass , and you can ad-
just the gain range of each from -30dB to +15dB.
4
5
-. PROGRAM Fader
6
There is a program fader available on both channels.
These faders are used to adjust the overall level of the
input channels.
MAIN / MIC
MAX
MIC LEVEL
MIN MAX
MAIN
MIN
3 4 5
