Avaya C360 Manager User Guide 161
Port Redundancy
The following table provides a list of the fields in the Port Redundancy
dialog box and their descriptions:
To configure the device’s port redundancy configuration:
1. Enter an amount in the
Switch Over field.
2. Select one of the
Switch Back option buttons.
3. If you selected
After x sec, enter the number of seconds for the
switch back in the
After x sec field.
Table 11-1. Port Redundancy Fields - 802.1x Tab
Field Description
Name
The name of the port redundancy.
Primary
The primary port of the port redundancy pair.
Secondary
The secondary port of the port redundancy
pair.
Intermodule
If checked, the port redundancy is an
intermodule port redundancy. If not checked,
the port redundancy is not an intermodule
port redundancy.
Switch Over (sec)
The minimum time between switching
between the ports in a port redundancy pair.
Switch Back
The amount of time after the primary port
link is reestablished after which the primary
port takes over from the secondary port.
Possible values include:
• Disabled - The primary port does not
take over from the secondary port.
• Immediately - The primary port takes
over from the secondary port as soon as
the primary port link is reestablished.
• After x sec- The primary port takes over
from the secondary port x seconds after
the primary port link is reestablished.
Redundancy Mode
State of Port Redundancy on the Avaya C360
device. Possible values are:
• Enabled - Port Redundancy is enabled
on this device.
• Disabled - Port Redundancy is not
enabled on this device.
