Installing the Avaya G350 Media Gateway
Step 2: Install the media modules
24 Installation of the G350 Media Gateway
December 2003
Figure 4: The G350 front panel ports and slots
Table 1, Permitted slots for media modules, on page 24 describes which media modules can be inserted
into which slots:
Allocate a slot for the media module. Make sure your slot allocations allow a permissible slot for every
media module.
Table 1: Permitted slots for media modules
Media module Permitted slots Description
MM312 V6 Provides 24 ports for connecting DCP telephones.
MM314 V6 Provides one Gigabit Ethernet port and 24 10/100
Ethernet ports for connecting data devices. The 24
10/100 Ethernet ports can provide power to
connected devices using Power over Ethernet (PoE).
MM340 V2, V3, V4, V5 Provides one E1/T1 WAN port for connecting to a
WAN endpoint device.
MM342 V2, V3, V4, V5 Provides one USP WAN port for connecting to a
WAN endpoint device.
MM710 V1, V2, V3, V4, V5 Provides one E1/T1 trunk port for connecting an
E1/T1 telephone trunk.
MM711 V1, V2, V3, V4, V5 Provides eight universal analog ports for connecting
analog telephones or trunks.
MM712 V1, V2, V3, V4, V5 Provides eight ports for connecting DCP telephones.
MM714 V1, V2, V3, V4, V5 Provides four analog ports for analog telephones and
four analog ports for analog trunks.
MM720 V1, V2, V3, V4, V5 Provides eight ports for connecting ISDN trunks.
MM722 V1, V2, V3, V4, V5 Provides two ports for connecting ISDN trunks.
S8300 V1 Media Server
