A SERVICE OF

logo

Open as PDF
next previous
Connecting devices
Step 3: Connect non-IP telephones and trunks
46 Installation of the G350 Media Gateway
December 2003
Connecting a DCP telephone
This section explains how to connect a DCP telephone.
!
WARNING:
The ports on the DCP media modules are intended for in-building use only. Phone lines connected
to these ports are not to be routed out-of-building. Failure to comply with this could cause harm to
personnel and equipment.
To connect a DCP telephone:
1 Wire a telephone port to a DCP port on the G350. The following media modules provide DCP
telephone ports:
— MM312 — 24 DCP ports.
— MM712 — 8 DCP ports.
2 Plug the DCP telephone into the telephone port.
Figure 10: The MM312 media module
Figure 11: The MM712 media module