78
Clearing IP access control
This option removes all entries from the IP access control feature within the
ServSwitch CX with IP.
What is IP access control?
The IP access control feature (configurable by a remote admin user) allows
certain network address ranges to be denied access to the ServSwitch CX with
IP. If set incorrectly, it is possible to exclude all network users and so this option
provides an emergency recovery point.
To clear IP access control
1
From a local or remote (not
accessible from a global keyboard),
log on as the ‘admin’ user.
2 Press
(hotkeys can
change).
3 Press to select ‘More menus’.
4 Select ‘Functions’.
5 Select ‘Configure IP port’.
6 Highlight the ‘Clear IP access
control’ option and press .
SERVSWITCH CX
Network Config
MacAddr 00:0F:58:40:07:FE
Use DHCP No
IPAddress 192.168.42.25
Net Mask 255.255.255.0
Gateway 192.168.0.1
VNC Port 5900
HTTP Port 80
Clear IPAccess Control
Enter-Select
-Up -Down
Esc-Exit
Space-Toggle
