17
Basic Operation
IMPORTANTIMPORTANT
• Make sure any glue, ink, or correction uid on the document is
completely dry before placing the document in the feeder.
• To prevent document jams, do not use any of the following:
Wrinkled or creased paper
Carbon paper or carbon-backed paper
Curled or rolled paper
Torn paper
Thin paper
Documents with staples or paper clips attached
Transparency
• While scanning documents, do not add or remove documents.
• When scanning is complete, remove the document from the document
return tray to avoid paper jams.
• Do not scan the same document more than 30 times. When a document
is scanned repeatedly, the paper can become wrinkled, earmarked, or
torn, which may result in paper jams.
• You can load documents that meet the following requirements in the
feeder.
Size (Width x Length): 5” x 5 1/2” (127 mm x 139.7 mm) to 8 1/2” x 14” (216 mm x
356 mm)
Weight: 13.3 lb to 27.9 lb Bond (50 g/m to 105 g/m)
• You can load up to 30 documents in the feeder.
