43
Fax
Selecting the Resolution
You can select a resolution that is appropriate for the document. Set a higher resolution for
documents that contain small text.
1
Place documents (→p.16).
2
Switch to the Fax Mode (→p.13).
3
Press [▲] or [▼] to highlight <Resolution>, and then press [OK].
4
Select the desired resolution, and then press [OK].
<200 dpi x 100 dpi (Normal)> For general text documents
<200 dpi x 200 dpi (Fine)> For ne text documents
<200 dpi x 200 dpi (Photo)> For documents that contain photographs
<200 dpi x 400 dpi (Super ne)
> For documents that contain very ne text
5
Send a fax to the desired destination (→p.44).
Changing the Default Settings
You can change the default settings that is applied when the machine is restarted or [ ]
(Reset) is pressed.
1
Press [ ] (Menu).
2
Press [▲] or [▼] to highlight <Fax TX Settings>, and then press [OK].
3
Press [▲] or [▼] to highlight <TX Function Settings>, and then press [OK].
4
Press [▲] or [▼] to highlight <Change Defaults>, and then press [OK].
5
Press [▲] or [▼] to highlight the desired option, and then press [OK].
6
Specify the desired setting.
7
After you have speci ed the setting, press [▲] or [▼] to highlight
<Apply>, and then press [OK].
8
Press [ ] (Menu) to close the screen.
