29
PREPARING TO USE YOUR FAX
2
5
After selecting or entering a value, press
[Start/Copy].
6
Repeat steps 4 and 5 as needed.
7
When the operation is complete, press [Stop].
Registration ends and the fax returns to standby
mode.
Start/Copy
DATA ENTRY OK
Registering your name and number
After 60 seconds of no operation panel input, the fax returns to standby
mode and any unregistered changes are lost.
Entering a number ______________________________
Whenever you are prompted to enter a fax number or a telephone number, follow
these procedures.
Use the numeric buttons to enter the number.
TEL=
❚ You can enter up to 20 digits for your fax number or 50 digits for a speed dialling
number.
❚ Be sure to enter the appropriate area code if dialling outside the area served by your
local exchange.
❚ You cannot enter dashes, slashes, commas, or other punctuation.
Use the One-touch Speed Dialling buttons as follows:
❚ To enter a space between numbers, press [Space].
❚ If you make a mistake, press [Clear] and enter the number
again.
❚ To erase a previously registered number, press [Clear].
You can also enter a new number over the old one.
If you need to enter a pause for any reason,
❚ Press [Redial/Pause] at the desired point in the sequence when entering a series of
digits.
❚ A pause within a number is 2 seconds long*. The length of this pause can be
adjusted. See MID PAUSE SET in TX SETTINGS, p. 87. A pause at the end of a
number is fixed at 10 seconds.
*4 seconds long in the UK and Hong Kong.
01
Send Options
02
Report
03
Cleaning
R
04
05 06
Space
Tone
07
Clear
D.T.
08
09 10
