Setting the Receive Mode
5-2
Receiving Faxes
5
NOTE
•
If you set <3. MAN/AUTO SWITCH> to <ON> in <FAX SETTINGS> of the Menu, the
machine will receive faxes automatically even when the receive mode is set to <MANUAL
MODE>. (See <3. MAN/AUTO SWITCH> of "Menu Descriptions," on p. 8-6.)
•
When you want to use DRPD, check with your local telephone company if the distinctive
ringer pattern service is available in your area.
3
Press [Set].
Receiving Faxes Automatically: FAX ONLY MODE
If you want to select <FAX ONLY MODE>, check the following:
■ Select This Mode If:
• you have a dedicated telephone line for fax use only.
• you only want to receive faxes automatically with the machine.
■ You Will Need to:
• set <FAX ONLY MODE>. (See "Setting the Receive Mode," on p. 5-1.)
• connect the machine to a dedicated telephone line. (See "Connect the telephone cable
and any necessary external device," in the Set-Up Sheet.)
■ When You Receive a Fax Call
The machine will receive the fax automatically.
NOTE
•
The machine does not ring when it receives a fax call. If you connect a telephone to the
machine and enable the <INCOMING RING> setting, the telephone will ring when the
machine receives a fax call.
•
You can select the number of rings before the machine receives faxes. (See <2.
INCOMING RING> of "Menu Descriptions," on p. 8-6.)
■ When You Receive a Voice Call
You will not be able to answer the call.
12/03/2003 WED 15:10
FaxOnly FINE
Ex:
