A SERVICE OF

logo

Open as PDF
next previous
4.
Lift the element
out
of
the filter
head.
5.
If there is any dirt
on the element
sealing surface
of
the filter head,
clean
it
off.
6.
Line up the
widest slot
in
the
top
of
the
new
element with the
widest key on
then top of the
filter head. Push
the element
in
until
the
mating
surfaces touch.
7.
Replace and tighten the ring
nut
to the top of'the filter head
8.
With the air bleed valve open,
turn
your ignition key to
START
for
10
to
15
seconds, Wait one minute for your starter
to
cool.
Do
this
until
you
can see clear fuel coming from the air bleed valve.
9.
Close the air bleed valve and replace the fuel cap.
10.
Start your engine and let
it
idle for five minutes. Check your fuel filter
and air bleed valve for leaks.
6-10