A SERVICE OF

logo

3.
Pick up the latch plate, and run the lap and shoulder portions of the
vehicle’s safety belt through or around the restraint. The child restraint
instructions will show you how. Tilt the latch plate to adjust the belt if
needed. If the shoulder belt goes in front of the child’s face or neck, put
it behind the child restraint.
4.
Buckle the belt.
Make sure the
release button is
positioned
so
you
would be able to
unbuckle the
safety belt
quickly if you
ever had to.
5.
To
tighten the
belt, pull up on
the shoulder belt
while you push
down on the child
restraint.
1-43