A SERVICE OF

logo

Open as PDF
next previous
Installation Instructions K4G120
7
10. Loosely install two 1/4-20 x 1/2” socket head carriage
screws (B1) through mounting holes on column arm (Z)
bracket and into 1/4” square nuts (B2). (See Figure 5)
11. Slide column arm (Z) bracket into column (V) until desired
mounting height is reached. (See Figure 5)
Figure 5
12. Tighten two 1/4-20 x 1/2” socket head carriage screws (B1)
to secure column arm (X) at desired height. (See Figure 6)
13. Install column cap (K) to column (V). (See Figure 6)
Figure 6
14. Use four #10-24 x 1/2” button head cap screws (G) to
secure head assembly (H) to arm assembly (X). (See
Figure 7)
Figure 7
(B1) x 2
10
11
(B2) x 2
(Z)
(V)
(B1) x 2
12
13
(K)
(X)
(G) x 4
14
(X)
(H)