Datalogic Scanning DS6400 Manual

A SERVICE OF

next previous

INSTALLATION

2

Master/Slave Models

When On-Line operating mode is used, the reader is activated by an External Trigger

(photoelectric sensor) when the object enters its reading zone. In the following case, the

signal is passed to the DS6400 by the C-BOX 100, which also supplies the system.

M/S

Presence

Sensor*

C-BOX 100

PG6000

Local Host

CAB-600X

* P.S. (Presence Sensor) connected to External Trigger/PS input.

Figure 50 – Point-to-Point for Master/Slave Models

Fieldbus Models

In this case no External Trigger is used and the C-BOX 100 only supplies the reader. The

DS6400 (Ethernet, DeviceNet or Profibus model) is connected to a fieldbus remote Host. It

can be activated by a signal generated by the remote Host or be always active if working in

Automatic operating mode.

Remote Host

Fieldbus

C-BOX 100

PG6000

CAB-601X

Fieldbus

Network

Figure 51 – Point-to-Point for Fieldbus Models

37