A SERVICE OF

logo

6. Perform the following steps as shown in the illustration:
a. Remove the screw that secures the base frame to the computer [1].
b. Pry the edges of the base frame [2].
c. Lift the base frame [3].
Installing the Base Frame
1. Place the base frame on the computer.
2. Tighten the screw to secure the base frame to the computer.
3. Route the display cable to the slot.
4. Connect the display cable.
5. Press the tab until the display cable is secured.
6. Tighten the screw.
7. Connect the hard drive connector and affix the adhesive tape.
24