30 About Your System
0405 Yes AHCI Port5 HDD
Error
See "Troubleshooting a Hard Drive" on
page 105.
5120 Yes CMOS cleared by
jumper
Reset password. See "Jumper Settings" on
page 112.
If the problem persists, see "Getting
Help" on page 119.
5121 Yes Password cleared by
jumper
Reset password. See "Jumper Settings" on
page 112.
If the problem persists, see "Getting
Help" on page 119.
8101 Yes Warning! USB Host
Controller not found
at the specified
address!!!
See "Troubleshooting a USB Device" on
page 96.
If the problem persists, see "Getting
Help" on page 119.
8102 Yes Error! USB device
failed to initialize!!!
See "Troubleshooting a USB Device" on
page 96.
If the problem persists, see "Getting
Help" on page 119.
8103 Yes Warning!
Unsupported UBS
device found and
disabled!!!
See "Troubleshooting a USB Device" on
page 96.
If the problem persists, see "Getting
Help" on page 119.
8104 Yes Warning! Port
60h/64h emulation is
not supported by
this USB Host
Controller!!!
See "Troubleshooting a USB Device" on
page 96.
If the problem persists, see "Getting
Help" on page 119.
8105 Yes Warning! EHCI
controller disabled.
It requires 64-bit
data support in the
BIOS.
See "Troubleshooting a USB Device" on
page 96.
If the problem persists, see "Getting
Help" on page 119.
Code Log in BMC Error Message Corrective Action
book.book Page 30 Friday, December 4, 2009 4:13 PM
