Installing System Components 81
Figure 3-18. Removing and Installing the Power Distribution Board
Installing the Power Distribution Board
1
Place the power distribution board on the system and secure it with the
four screws. See Figure 3-18.
2
Connect the cables to the power distribution board. See Figure 5-7.
3
Connect the power distribution cables to the system board. See "System
Board" on page 93.
4
Install the expansion card riser. See "Installing the Expansion-Card Riser"
on page 67.
5
Install the power supplies to the system. See "Installing the Redundant
Power Supply" on page 80.
6
Install the cooling shroud. See "Installing the Cooling Shroud" on page 55.
7
Replace the system cover. See "Closing the System" on page 54.
8
Reconnect the system and peripherals to their electrical outlets, and turn
on the system.
1 fan module cable connector 2 power distribution board
3screws (4)
book.book Page 81 Friday, December 4, 2009 4:13 PM
