A SERVICE OF

logo

Open as PDF
next previous
Replacing the Bluetooth Card
1. Follow the instructions in Before You Begin.
2. Slide the Bluetooth card into the slot on the top cover.
3. Connect the Bluetooth-card cable to the connector on the system board.
4. Follow the instructions from step 9 to step 12 in Replacing the Top Cover.
5. Replace the display assembly (see Replacing the Display Assembly).
6. Replace the keyboard (see Replacing the Keyboard).
7. Replace the palm-rest assembly (see Replacing the Palm-Rest Assembly).
8. Replace the memory module(s) (see Replacing the Memory Module(s)).
9. Replace the module cover (see Replacing the Module Cover).
10. Replace the battery (see Replacing the Battery).
Back to Contents Page
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.