A SERVICE OF

logo

Open as PDF
next previous
10. Replace the hinge cover (see Replacing the Hinge Cover).
Display Latch
Removing the Display Latch
1. Follow the instructions in Preparing to Work Inside the Computer.
2. Remove the hinge cover (see Removing the Hinge Cover).
3. Remove the keyboard (see Removing the Keyboard).
4. Remove display assembly (see Removing the Display Assembly).
5. Remove the display bezel (see Removing the Display Bezel).
6. Slightly rotate the left side of the display latch assembly away from the center of the top cover, then lift up and to the left to remove the latch assembly.
Replacing the Display Latch
1. Follow the instructions in Preparing to Work Inside the Computer
2. Follow the instructions in Removing the Display Latch.
CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the
back panel) on the computer.
NOTICE: The display latch spring is not physically connected to the latch assembly. Exercise care that the spring is not lost.
1
display latch assembly
2
latch spring
3
guide post
4
guide post slot
CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the
back panel) on the computer.
NOTICE: Before replacing the display latch assembly, ensure that the latch spring is properly aligned on the guide post.