59
ENGLISH
Basic versionSimple version InformationAdvanced version
Playback in ZONE2 (Separate room)
• You can operate this unit so as to enjoy audio in a room (ZONE2)
other than the MAIN ZONE (room where the unit is located).
• You can simultaneously play back the same source in both the MAIN
ZONE and ZONE2. You can also play back separate sources in the
MAIN ZONE and ZONE2.
• There are two methods to do this, as described below. Choose one
of the methods.
q ZONE2 playback by speaker output
w ZONE2 playback by audio output
(using an external amplifier)
The source selected for ZONE2 is also output from the recording
output connectors.
q ZONE2 playback by speaker
output
The ZONE2 audio signals are output from this unit’s SURR.BACK/AMP
ASSIGN speaker terminals using the amplifier assignment function.
Connecting and setting the speakers
“Amp Assign”
setting (vpage77)
and audio signals
output
Connecting the speakers
ZONE2
Output signal :
Stereo (L / R)
MAIN ZONE
ZONE2
This unit
In this case, the volume for ZONE2 can be adjusted on the amplifier.
w ZONE2 playback by audio output
The audio signals connected to this unit’s ZONE2 output terminals
(ZONE2 OUT) are output to the ZONE2’s amplifier and played with
that amplifier.
Connection (ZONE2)
R
L
R
L
AUX
IN
MAIN ZONE
ZONE2
This unit
• Adjust the volume on the connected amplifier.
• We recommend using high quality pin-plug cables for audio
connections in order to prevent noise.
• Also be sure to read the operating instructions of the connected
devices.
NOTE
• When the input source to which the digital input connectors
(OPTICAL/COAXIAL) are assigned is selected in ZONE2, playback
is only possible if the digital signal being input is in PCM (2-channel)
format.
• It is not possible to play the digital audio signals input from the HDMI
terminals in ZONE2.
Use analog connections for ZONE2 playback.
• When certain digital signals are being input, noise may be output
from the ZONE2 audio output connectors.
Video output
Video Connection
The video signals of this unit’s ZONE2 video output terminal are
played by the ZONE2 TV.
VIDEO
IN
ZONE2
VIDEO
MAIN ZONE
ZONE2
This unit
NOTE
• It is not possible to output video signals input to the HDMI or
component terminals to ZONE2.
• The menu screen is not output.
