Information
93
ENGLISH
Basic versionSimple version Advanced version Information
93
ENGLISH
Basic versionSimple version Advanced version Information
Specifying the zone used with the
remote control unit
When the ZONE SELECT button is pressed, only the set zone can be
operated with the remote control unit.
1
Press and hold POWER ON and
ZONE/DEVICE ON for at least 3
seconds.
The zone mode indicator flashes twice.
2
Press ZONE SELECT.
The zone mode indicator flashes twice.
3
Press 1 – 3 to set.
The zone mode indicator flashes twice.
[Settable items]
1 When only using “MAIN ZONE”
2 When using “MAIN ZONE” /
“ZONE2”
3 When using “MAIN ZONE” /
“ZONE2” / “ZONE3” (Default)
Resetting the remote control unit
Settings for the remote control unit are returned to the default values.
1
Press and hold POWER ON and
ZONE/DEVICE ON for at least 3
seconds.
The zone mode indicator flashes twice.
2
Press 9, 8 and 1, in that order.
MAIN indicator flashes four times.
All the settings are restored to their
defaults.
F Part names and functions vpage94
F Other information vpage98
F Troubleshooting vpage106
F Specifications vpage110
F Index vpage111
Information
Here, we list various information related to this unit.
Please refer to this information as needed.
