163
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
2 Video Output
Selects which HDMI outputs to use.
Auto(Dual) (Default) : The presence of a TV connected to the HDMI
MONITOR 1 or HDMI MONITOR 2 connector is
detected automatically, and that TV connection
is used.
Monitor 1 : A TV connected to the HDMI MONITOR 1 connector is
always used.
Monitor 2 : A TV connected to the HDMI MONITOR 2 connector is
always used.
%
•If both the HDMI MONITOR 1 and HDMI MONITOR 2 connectors are
connected and “Resolution” (vpage166) is set to “Auto”, the signals are
output with a resolution compatible with both TV.
•With “Resolution” (vpage166) not set to “Auto”, check whether the
TV you are using is compatible with the resolution under “Video” – “HDMI
Monitor 1” or “HDMI Monitor 2” (vpage197).
2 HDMI Pass Through
Selects how the AV receiver will pass HDMI signals to the HDMI
output in standby power mode.
On (Default) : Passes the selected HDMI input through the AV
receiver’s HDMI output when the AV receiver is in
standby power mode.
O : No HDMI signals are passed through the AV receiver’s HDMI
output in standby power mode.
2 HDMI Control
You can link operations with devices connected to HDMI and
compatible with HDMI Control.
On : Use HDMI control function.
O (Default) : Do not use HDMI control function.
%
•Please consult the operating instructions for each connected device to check
the settings.
•Refer to “HDMI control function” (vpage125) for more information about
the HDMI control function.
NOTE
•If the “HDMI Control” settings have been changed, always reset the power
to connected devices after the change.
