165
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
Output Settings
Makes screen-related settings.
%
•Can be set when each input source is assigned “HDMI”, “COMP” or “VIDEO”
(vpage169).
•“Resolution”, “Progressive Mode” and “Aspect Ratio” can be set when “i/p
Scaler” is set to anything other than “O”.
•“Output Settings” can not be set when 4K signals are input.
2 Video Mode
Make settings for video processing.
Auto (Default) : Process video automatically based on the HDMI
content information.
Game : Always process video for game content.
Movie : Always process video for movie content.
%
•If “Video Mode” is set to “Auto”, the mode is switched according to the
input contents.
2 Video Conversion
The input video signal is converted automatically in conjunction with
the connected TV (vpage229 “Video conversion function”).
On (Default) : The input video signal is converted.
O : The input video signal is not converted.
2 i/p Scaler
Convert the input source resolution to the resolution set.
n When the input source is set other than to “iPod/USB” and
“NETWORK”
Analog (Default) : Use i/p (interlace-to-progressive) scaler function for
analog video signals.
HDMI : Use i/p scaler function for HDMI video signals.
O : Do not use i/p scaler function.
n When the input source is set to “iPod/USB” and “NETWORK”
On (Default) : Use i/p scaler function.
O : Do not use i/p scaler function.
%
•“Analog & HDMI” can be set for input sources for which an HDMI input
connector is assigned.
•Which items can be set depend on the input source assigned to each input
connector.
•This function is not eective when the input signal is “x.v.Color”, 3D, sYCC
601 color, Adobe RGB color, Adobe YCC 601 color or computer resolutions.
