xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
251
Click Apply to implement the guest 802.1x VLAN. Once properly configured, the Guest VLAN Name and associated ports will
be listed in the lower part of the window, as seen in the example above.
NOTE: For more information and configuration examples for the 802.1X Guest VLAN
function, please refer to the Guest VLAN Configuration Example located on the D-Link
website.
Trusted Host
The Trusted Host window allows the administrator to restrict access to the Switch to up to three specific hosts. To add a new
Trusted Host, click Security >Trusted Host. The following window will appear:
Figure 11- 21. Trusted Host window
The Trusted Host window is divided into two sections. The top section allows the administrator to add a new Trust Host and the
bottom section contains a table that displays information about the Trusted Hosts that have been configured in the Switch.
To add a new Trusted Host, configure the parameters as described below:
Parameter Description
Secure Access IP
Enter the IP address of the host that requires access to the Switch.
Secure Access IP
Submask
Enter the Subnet Mask of the host that requires access to the Switch
Click the Add button to add the host to the Trusted Host List.
To remove all Trusted Hosts, click the Clear All button.
