PCI30FG User Manual
Eagle Technology © Copyright 2002 30
INTSTATUS 501 Queries interrupt system’s status.
INTBUSCONNECT 502 Connect interrupt system to bus.
INTISAVAILABLE 503 Check if an interrupt is available.
INTNUMTRIG 504 Check number times interrupted
Error Codes
Name Value Description
EDRE_OK 0 Function successfully.
EDRE_FAIL -1 Function call failed.
EDRE_BAD_FN -2 Invalid function call.
EDRE_BAD_SN -3 Invalid serial number.
EDRE_BAD_DEVICE -4 Invalid device.
EDRE_BAD_OS -5 Function not supported by operating system.
EDRE_EVENT_FAILED -6 Wait on event failed.
EDRE_EVENT_TIMEOUT -7 Event timed out.
EDRE_INT_SET -8 Interrupt in use.
EDRE_DA_BAD_RANGE -9 DAC value out of range.
EDRE_AD_BAD_CHANLIST -10 Channel list size out of range.
EDRE_BAD_FREQUECY -11 Frequency out of range.
EDRE_BAD_BUFFER_SIZE -12 Data passed by buffer incorrectly sized
EDRE_BAD_PORT -13 Port value out of range.
EDRE_BAD_PARAMETER -14 Invalid parameter value specified.
EDRE_BUSY -15 System busy.
EDRE_IO_FAIL -16 IO call failed.
EDRE_BAD_ADGAIN -17 ADC-gain out of range.
EDRE_BAD_QUERY -18 Query value not supported.
EDRE_BAD_CHAN -19 Channel number out of range.
EDRE_BAD_VALUE -20 Configuration value specified out of range.
EDRE_BAD_CT -21 Counter-timer channel out of range.
EDRE_BAD_CHANLIST -22 Channel list invalid.
EDRE_BAD_CONFIG -23 Configuration invalid.
EDRE_BAD_MODE -24 Mode not valid.
EDRE_HW_ERROR -25 Hardware error occurred.
EDRE_HW_BUSY -26 Hardware busy.
EDRE_BAD_BUFFER -27 Buffer invalid.
EDRE_REG_ERROR -28 Registry error occurred.
EDRE_OUT_RES -29 Out of resources.
EDRE_IO_PENDING -30 Waiting on I/O completion
Digital I/O Codes
Name Value Description
DIOOUT 0 Port is an output.
DIOIN 1 Port is an input.
DIOINOROUT 2 Port can be configured as in or out.
DIOINANDOUT 3 Port is an input and an output.
