Page 4 Emhart Teknologies - 50 Shelton Technology Center, Shelton CT 06484 - Tel. (203) 924-9341 - Fax (800) 225-5614
Packaged Accessories
Qty Item 2100 2101 Part No.
1 ProSet™ Rivet Tool
ü
ü
1 Operating Instructions
ü ü
P449
1 Maintenance Manual
ü ü
P442
1 Nosepiece for 4 size open end rivets
ü
Installed PRN414
1 Nosepiece for 5 size open end rivets
ü ü
PRN514
1 Nosepiece for 6 size open end rivets Installed
ü
PRN614
1 Jaw Pusher -
ü
PRG520-33
1 Air Hose Assembly
ü ü
PRT5200-220
1 Warranty Card
ü ü
FG2184
Air supply * 6 scfm (150 l/min) Minimum
Recommended Operating Pressure 72.5-90 PSI (5.0-6.2 Bar) dry, filtered
Maximum Operating Pressure 100 PSI (6.9 Bar) dry, filtered
Hydraulic Oil **
POP
®
p/n: PRG540-130 [1 qt. (.945 ml)] (Mobil DTE 26)
Jaw Lubricant **
POP
®
p/n: PRG510-130 [6 oz. (177 ml)]
Seal Lubricant ** Lubriplate
®
130 AA
*
Note: For best results and long service life, use only a dry filtered air supply.
**
Note: See lubricant safety information.
Lubriplate
®
is a register mark of Fiske Brothers Refining Company.
ProSet™ 2100 ProSet™ 2101
w/o MCS w/MCS w/o MCS w/MCS
Weight 3.31 lbs. (1.5 kg) 3.70 lbs. (1.68 kg) 3.13 lbs. (1.4 kg) 3.50 lbs. (1.59 kg)
Length 11.14” (283.0 mm) 12.32” (312.9 mm) 10.53” (267.5 mm) 11.71” (297.4 mm)
Height 11.07” (281.2 mm) 10.85” (275.6 mm)
Tool stroke .669” (17 mm) .629” (16 mm)
Pulling force * 1900 lbs @ 85 PSI (8452N @ 5.9 bar) 1900 lbs@ 85 PSI (8452N @ 5.9 bar)
Air consumption
per rivet
.011 cu. ft.
(.31 liters)/rivet
0 to 2 scfm
adjustable
.011 cu. ft.
(.31 liters) / rivet
0 to 2 scfm
adjustable
Tool Requirements
Specifications
* ProSet™ 2001 models are recommended for rivet break loads of 1,000 lbs. max.
