GL815E Endura Motherboard Product Manual
Page 3 of 51
Safety & Approvals Notices
Battery
This product contains a lithium cell.
When removing or replacing the lithium cell, do not use a conductive instrument as a short-
circuit may cause the cell to explode. Always replace the cell with one of the same type.
This product uses a CR2032 cell. Dispose of a spent cell promptly – do not recharge,
disassemble or incinerate. Keep cells away from children.
CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufacturer. Dispose of batteries according
to the manufacturer's instructions.
LAN (Local Area Network) Connector
This product may include an RJ45 LAN connector (see installation guide). Do not connect
to anything other than an Ethernet LAN.
Thermal Interface Material
This product may contain thermal interface material between devices and heatsinks. This
can cause irritation and can stain clothing. Avoid prolonged or repeated contact with the
skin and wash thoroughly with soap and water after handling. Avoid contact with eyes and
inhalation of fumes. Do not ingest.
Anti-static Precautions
This product contains static-sensitive components and should be handled with care. It is
recommended that the product be handled in a Special Handling Area (SHA) as defined in
EN"000"5-":"992. Such an area has working surfaces, floor coverings and chairs
connected to a common earth reference point. An earthed wrist strap should be worn whilst
handling. Other examples of static-sensitive devices are the memory modules and the
processor. Failure to employ adequate anti-static measures can cause irreparable damage
to components on the motherboard.
Safety
This product complies with the American Safety Standard UL"950 when installed in a suitable
chassis.
Electromagnetic Compatibility
This product complies with the following EMC standards.
FCC Class B (Title 47 of Code of Federal Regulations, parts 2 & "5, subpart B)
EN55022:"998 Class B
EN55024:"998
