Follow these steps to set the real-time clock:
1.
At the main menu, highlight Real-time
clock.
If the
time and date have been previously set, the current settings
appear:
Time
09:16:52
Date
03-29-1992
If the time and date are correct, you can skip the rest of this
section.
If the time and date are incorrect, go to step 2 below.
If the time and date have never been set, the submenu
contains a template for you to fill in:
Time
xx:xx:xx
Date
xx-xx-xxxx
2.
Press
m
to move the cursor block into the submenu.
3.
To set or change the time, press
m
again. You see this
template:
hh:mm:ss
(“hh” stands for hours, “mm” stands for minutes, and “ss”
stands for seconds.)
4.
Using a 24-hour clock, enter the time in the exact format
shown in the box. Type two digits for each part; the Setup
program automatically inserts the colons (:). For example,
to set the time to 1:30 p.m., you would type the following:
133000
2-18
Running the Setup Program
