Adjusting the Projected Image
161
B To zoom, use the [h] button on the remote control or the
arrow buttons on the back of the projector as shown below.
C When you’re done, press the [Esc] button on the remote
control or on the back of the projector.
Adjusting the Tilt of the Projected Image
When setting up on a desk, adjust the horizontal tilt of the projector with
its front and rear feet.
Correcting Distortion in the Projected Image
There are four methods of correcting distortion in projected images as
below.
• Quick Corner
This allows you to manually correct each of the four corners of the
projected image separately. s "Quick Corner" p.162
We recommend using Quick Corner to accurately adjust keystone
distortion.
• H/V-Keystone
This allows you to manually correct distortion in the horizontal and
vertical directions independently. You can perform easy H/V-Keystone
corrections by using the [w/] [v/] [</] and [>/ ] buttons
on the projector's control panel. s "H/V-Keystone" p.164
• Arc Correction
Fine adjustment of the curved distortion caused by slack or shrinkage
of the screen. s "Arc Correction" p.166
