Rear panel connections
Joystick Connector - 15 pin DIN
15 do not connect10 Button 45 Ground
14 Button 39 +5V DC4 Ground
13 Joystick 2 - Y8 +5V DC3 Joystick 1 - X
12 do not connect7 Button 22 Button 1
11 Joystick 2 - X
6 Joystick 1 - Y
1 +5V DC
Notes:
1. The 5V DC is not fused and should only be used to power a joy stick or other low power devices. No more than
100mA should be drawn. Damage may result to the remote if this is shorted or connected to any other power
source.
2. Buttons are active with a switch closure to ground.
3. The X and Y inputs are suitable for a 10K ohm potentiometer connected between +5V and ground, or may be used
for extra switches, with external 10K pull-ups to +5V and closure to ground.
MIDI in connector - 5 pin DIN MIDI out connector - 5 pin DIN
5 MIDI TX -5 MIDI RX -
4 MIDI TX +4 MIDI RX +
3 chassis ground3 no connect
2 no connect2 MIXI TX -
1 no connect1 MIDI TX +
EVE/NET Connector - 8 way RJ-45
BrownBrownBrown
Common / Chassis Ground
8
BlueWhite/BrownWhite/Brown
Common
7
YellowGreenOrange
Signal -
6
GreenOrangeWhite/BlueWhite/Blue
Power +
5
RedBlueBlue
Power +
4
BlackWhite/OrangeWhite/GreenWhite/Orange
Signal +
3
OrangeBlueOrangeGreen
Common
2
GreyWhite/BlueWhite/OrangeWhite/Green
Power +
1
TelephoneNetwork
10 base-T
Network
T568B
Network
T568A
EVE/NET Function
Appendix A - Connections
Document 141044
Release 1.0 Page 13 of 20
