To connect to a preamplifier with unbalanced inputs (eg G01/G51)
ANALOGUE OUT
COMMS COMMS
PHONO LEADS
COMMS LEAD
G01/G51G07 24-bit CD Player
ANALOGUE IN
A2
To connect to Meridian DSP loudspeakers (eg DSP5000s)
DSP5000 – Slave
DSP5000 – Master
COMMS
INPUT OUTPUT
DIGITAL INPUTS
2
1
M5 LEAD S5 LEAD
DIGITAL OUT COMMS
G07/G08
DIGITAL
OUTPUT
COMMS
INPUT OUTPUT
DIGITAL INPUTS
21
DIGITAL
OUTPUT
Installing the
CD player
9
•Connect the ANALOGUE OUT outputs from the G07 or G08 to
the unbalanced inputs on the preamplifier, using phono leads.
•If the preamplifier is a Meridian product connect together the
COMMS sockets using the Comms lead provided.
The G07 and G08 can be connected directly to Meridian DSP
loudspeakers to create a complete compact stereo system,
with volume and other preamplifier controls provided by the
loudspeakers via the MSR+.
•Connect the DIGITAL output and a COMMS socket from the CD
player to DIGITAL INPUT 1 and the COMMS input on the DSP
loudspeaker chosen as the master, using an M5 lead.
•Connect the DIGITAL and COMMS outputs from the master DSP
loudspeaker to DIGITAL INPUT 1 and the COMMS input on the
other (slave) DSP loudspeaker, using an S5 lead.
•Configure the loudspeakers as described in the
Meridian DSP
Loudspeaker User Guide
.
•To display the system source and volume on the CD player,
choose Type 2; see
Resetting the product
, page 13.
G Series CD Player 9 12/9/03, 2:26:40 pm
