SeriTek/2SE2-E Specifications
General System
Hardware
Requirements
PC with available PCI Express expansion slot
Operating Systems
Supported
Windows NT
Windows 2000
Windows XP
Windows 2003
Bus Type
PCI Express 1x lane
Can be inserted in any available PCI Express slot
(4x, 8x, etc)
External
Connectors
2-port external Serial ATA (SATA) interface
connectors support up to 2 external hard drives or
peripherals (eSATA type/I-shape connectors)
Drive Types
Supported
Serial ATA hard drive
Backward compatible with Ultra DMA 133/100/66
hard drives*
ATAPI Device
Support
Yes*
Data Transfer
Rates
Up to 300 MBytes/second or 3.0 Gbits/second burst
data transfer rate
Drive Modes
Supported
Serial ATA
UltraDMA modes 6/5/4/3/2/1/0, PIO modes
4/3/2/1/0*
Advanced Data
Features
Fully compliant with Serial ATA 1.0a specification
Bus Mastering off-loads data I/O handling from CPU
Complete 32-bit CRC error checking, for all bits
transmitted (command, data, and status), offers
enhanced data protection for high-speed Serial ATA
drives
Dual independent data channels allows for separate
device timings
Automatically identifies and configures drive types*
Automatically detects and supports devices utilizing
many transfer modes including UltraDMA
6/5/43/2/1/0, PIO 4/3/2/1/0*
Onboard Flash
ROM
Allows easy upgrades to the latest firmware
Cables Supported
7-pin shielded SATA cable, up to 1 meter in length
Warranty
Two year limited parts & labor
Physical
Dimensions
89mm(L) x 1.6mm(W) x 64mm(H) (not including
bracket)
Power
Requirements
5V ± 5%
Environmental
Temperature:
Operating: +5°C to +55°C
Non-Operating: -25°C to +70°C
Relative humidity:
Operating: 20% to 80%
Non-Operating: 15% to 90%
EMC Compliance
EN55022/1998, EN55024/1998 (European
Community)
FCC Part 15 Class B (US)
* IDE to Serial ATA converter module required for Parallel ATA and Ultra ATA133/100/66 drives
