4
material safety instructions on the container of the ice machine cleaner.
• Do not use this apparatus for other than its intended purpose.
SAVE THESE INSTRUCTIONS
Electrical Connection
Do not, under any circumstances, cut or remove the third (ground) prong from the
power cord. For personal safety, this appliance must be properly grounded. The power
cord of this appliance is equipped with a 3-prong grounding plug that mates with a
standard 3-prong grounding wall outlet to minimize the possibility of electric shock
hazard from the appliance. Have the wall outlet and circuit checked by a qualified
electrician to make sure the outlet is properly grounded. When a standard 2-prong wall
outlet is encountered, it is your responsibility and obligation to have it replaced with a
properly grounded 3-prong wall outlet.
The ice maker should always be plugged into its own individual electrical outlet which
has a voltage rating that matches the rating label on the appliance. This provides the best
performance and also prevents overloading house wiring circuits which could cause a
fire hazard from overheated wires. Never unplug your ice maker by pulling on the
power cord. Always grip the plug firmly and pull straight out from the outlet. Repair or
replace immediately all power cords that have become frayed or otherwise damaged. Do
not use a cord that shows cracks or abrasion damage along its length or at either end.
When moving the ice maker, be careful not to damage the power cord.
Extension Cord
Because of potential safety hazards under certain conditions, it is strongly recommended
that you do not use an extension cord with this ice maker.
Major Features
1. Completely automatic operation.
2. The different colors of the LED display indicate various work modes.
3. The fan motor responds to the ambient temperature. If room temperature is low, the
motor will stop working to keep the cooling system in good working condition.
4. Ice cube size is adjustable.
5. A sensitive probe and accurate timer enhance the performance of the ice maker.
Technical Information
Model: FIM200
Electrical input: 115VAC ~ 60Hz
Power consumption: 9.4 kW·h /100 lbs of ice
Ice-making/Ice-harvest rated current: 9.9A/13.3A
Refrigerant: R404a, 24.7 oz.
High/Low side pressure: 290psig/190psig
Unit width x depth x height: 24” x 24” x 39”
Unit weight: 144 lbs maximum
Ice storage capacity: 75 lbs maximum
Ice-making capability: 200 lbs/day*
Ice shape: Cube
Ice cube dimensions: 1” x 1” x _”
