3-9
NAV SETUP menu description
Item Description Settings (Default in bold)
Position Source Chooses source of position data.
FURUNO BB GPS: GPS Receiver
GP-320B/330B or Weather sensor WS-200
GP: GPS navigator (via NETWORK or
NMEA port)
LC: Loran C navigator (via NETWORK or
NMEA port)
ALL: Multiple navaid connection (via
NETWORK or NMEA port)
Speed Source Chooses source of speed data
ETR (NavNet sounder), NMEA
Temperature
Source
Chooses source of water
temperature data.
ETR, NMEA. Select ETR to show water
temperature data fed from the network
sounder.
Depth Source
Chooses source of depth data.
ETR, NMEA. Select ETR to show depth
data fed from the network sounder.
STW Calibration Calibrates NMEA speed data. Enter
amount in percentage.
-50 to +50%, 00
Temp Calibration Calibrates NMEA temperature data.
Enter offset to correct NMEA
temperature data.
-20.0°C to +20.0°C (or equivalent in °F),
00.0°C
Depth Calibration Calibrates NMEA depth data. Enter
offset to correct NMEA depth data.
-15 to +90 ft (or equivalent in m, fa or P/B).
00 ft
Wind Averaging Enter a value to smooth wind
speed/direction data. Ship’s bow is
referenced to smooth wind vector
movement.
001-600 s, 001 s
Wind Direction
Offset
Offsets wind direction data.
S180°-P180°, S000.0°
Wind Speed
Calibration
Offsets NMEA wind speed data.
Enter amount in percentage.
-50 to +50%, 00%
Wind (MWV)
Source
Chooses source of wind data.
FURUNO BB GPS, NMEA: Select
FURUNO BB GPS to show wind data fed
from the WS-200.
Air Temperature
Source
Chooses source of air temperature
data.
FURUNO BB GPS, NMEA: Select
FURUNO BB GPS to show air temperature
data fed from the WS-200.
Air Pressure
Source
Chooses source of air pressure
data.
FURUNO BB GPS, NMEA: Select
FURUNO BB GPS to show air pressure
data fed from the WS-200
36. After setting up, press the NEXT soft key, and the GPS SETUP menu appears. This
menu setups the built-in GPS receiver.
