3-3
11. Choose appropriate item and then press the EDIT soft key. One of the following displays
appears depending on your selection.
DEVICE NUMBER
{ 1 (IP:172.031.003.001)
~ 2 (IP:172.031.003.002)
{ 3 (IP:172.031.003.003)
{ 4 (IP:172.031.003.004)
RADAR SOURCE
{ 1 (IP:172.031.003.001)
~ 2 (IP:172.031.003.002)
{ 3 (IP:172.031.003.003)
{ 4 (IP:172.031.003.004)
{ NO CONNECT
SOUNDER SOURCE
{ ETR0 (IP:172.031.092.001)
~ ETR1 (IP:172.031.092.011)
{ ETR2 (IP:172.031.092.012)
{ ETR3 (IP:172.031.092.013)
{ ETR4 (IP:172.031.092.014)
{ ETR5 (IP:172.031.092.015)
{ ETR6 (IP:172.031.092.016)
{ ETR7 (IP:172.031.092.017)
{ ETR8 (IP:172.031.092.018)
{ ETR9 (IP:172.031.092.019)
{ OFF
AUX SOURCE
~ AUX1 (IP:172.031.008.001)
{ AUX2 (IP:172.031.008.002)
{ AUX3 (IP:172.031.008.003)
{ AUX4 (IP:172.031.008.004)
{ OFF
▲
▼
▲
▼
▲
▼
▲
▼
12. Choose appropriate setting and then press the ENTER soft key. If you set DEVICE NO.
or RADAR SOURCE, turn the power on and off again at the completion of the
installation wizard.
7-inch
display
Device 2
7-inch
display
Device 3
Radar Antenna
Device Number - 1
Radar Source - 1
Sounder Source - ETR0
Aux Source - AUX1
HUB
Echo
Sounder
ETR0
(default)
FAX30
AUX1
(default)
Device Number - 2
Radar Source - 1
Sounder Source - ETR0
Aux Source - AUX1
Device Number - 3
Radar Source - 1
Sounder Source - ETR0
Aux Source - AUX1
10-inch
display
Device 1
