A SERVICE OF

logo

2-1
2. WIRING
2.1 Connections
Connect the signal and power cables, the ground wire and optional equipment as
shown in Figure 2-1.
OPTION
HDG
NMEA
DJ-1
OPTION
MARINE RADAR
TYPE
SER.NO.
DATE
COMPASS SAFE DISTANCE
STD M STEER M
EQUPMENT CLASS
FURUNO ELECTRIC CO., LTD
10.2-31.2VDC
3 GND
1
2
Signal cable connector
Connect signal cable
from antenna here.
NMEA connector
Connect navaid
here.
HDG connector
Connect heading
sensor here.
Power cable connector
Connect power
cable here.
Ground terminal
Connect ground wire between
here and ship's ground.
OPTION connector
Connect navaid,
echo sounder or
external buzzer here.
CAUTION
Tighten the boot-band
securely to ensure
watertightness.
CAUTION
For 24 volt power,
replace fuse with 5A
fuse (supplied), and
attach "5A fuse label"
to the fuse cover on
power cable.
Factory setting is 10A
for 12 VDC set.
See next page.
OPTION connector
Connect remote
display here.
*2
*3
*1
Signal cable
S03-83
Figure 2-1 Display unit, rear view
*1:The following cables are supplied with remote display.
Type Code no.
Remarks
FM-C10FPD002-050 000-143-894 5m
FM-C10FPD002-100 000-143-893 10m
FM-C10FPD002-150 000-143-892 15m