Selecting a different data item for any data
field on the Map Page:
1) With Map Page displayed, press the MENU
Key to display an options menu.
2) Turn the large right knob to highlight ‘Change
Fields?’ and press the ENT Key.
3) Turn the large right knob to highlight the data
field to be changed.
Highlighted
Data Field
4) Turn the small right knob to select the desired
type of data for this field and press the ENT
Key.
5) Press the small right knob to remove the
cursor.
Inhibiting TAWS or TERRAIN:
1) Select the TAWS or TERRAIN Page and press
the MENU Key. ‘Inhibit Terrain?’ is selected
by default.
2) Press the ENT Key. The ‘TER INHB’ annunciation
is displayed in the annunciator field when
TAWS or TERRAIN is inhibited.
Annunciator Field
NOTE: Inhibit mode deactivates TAWS or
TERRAIN alerting when deemed unnecessary
by the pilot. Flying VFR into an area where
unique terrain exists could cause the system to
annunciate nuisance alerts. Pilots should use
discretion when inhibiting the TAWS or TERRAIN
system and always remember to enable the
system when appropriate.
Enabling TAWS or TERRAIN:
1) Select the TAWS or TERRAIN Page and press
the MENU Key. ‘Enable Terrain?’ is selected
by default.
2) Press the ENT Key. The TAWS or TERRAIN
system is functional again.
