17
Choosing a location
www.gateway.com
Checking the installation environment
After choosing a location for the autoloader, consider the following:
■ The maximum recommended ambient temperature for the autoloader is
+50°F to +104°F (+10°C to +40°C). Install the autoloader in an environment
compatible with this temperature.
■ Make sure that the fan opening at the back of the autoloader and the vent
openings in the front are free of cables and other obstructions.
■ Make sure that the supply circuit is suitable for all equipment loads in the
cabinet.
■ Make sure that the outlet or power strip is correctly grounded.
■ Make sure that the installation environment is free of conditions that could
cause electrostatic discharge (ESD). If possible, use an antistatic mat and
grounded static protection wristband during installation. If a mat and
wristband are not available, touch a known grounded surface, such as a
computer’s metal chassis.
