Safety F - 160 Operation and Maintenance Manual
© GBC Pro - Tech August 1999Page 1 - 12
CAUTION
If not installed properly, you can be injured
or cause damage to the table or laminator.
1.5 Applications
The following symbols are positioned at
various points in Section 6 Applications.
WARNING
Do not wear ties, loose fitting clothing or
dangling jewelry while operating or
servicing the laminator. These items can get
caught in the nip and choke you or you can
be crushed or burned.
The mount adhesive must not exceed 1 in.
the width of the substrate. If it does, you
will experience complications with this
application.
INFORMATION
CAUTION
Sharp edges on a substrate should be filed
smooth and GAP manually adjusted.
Sharp edges can CUT the rollers!
Caution should always be exercised
when using the laminator with
the safety shields raised.
You can be seriously HURT or INJURED!
WARNING
INFORMATION
Twisting the roll of craft paper while
sliding makes loading the film onto
the unwind shaft easier.
Ensure the roll of laminate is loaded
properly on the unwind shaft.
Exposed adhesive should be facing
away from the rollers.
This will prevent hours of roll cleaning!
CAUTION
