F - 160 Operation and Maintenance Manual
© GBC Pro - Tech August 1999 Page 4 - 11
Installation
o) Remove the level.
p) Lower the front safety shield.
q) Turn MAIN POWER to “OFF “.
4.7 Safety check
The safety check will ensure that all safety
devices and interlock switches are functioning properly.
WARNING
Do not wear ties, loose fitting clothing or
dangling jewelry while operating or
servicing the laminator. These items can get
caught in the nip and choke you or you can
be crushed or burned.
WARNING
If you find a safety feature not working
properly, you should contact your local
service representative immediately
k) Place the level across the top of the upper main
roll in the center. Refer to Figure 4.6.4
Figure 4.6.4 Left to right
Plane4
Plane4
Level
l) Level the machine from left to right.
m) Verify your adjustments when finished.
n) Press GAP
ss
ss
s to 1 in. setting.
GAP
PRESSURE
1
