Chapter 4 41
Troubleshooting SCSI
Troubleshooting
0x3e 0x00 logical unit has not self-configured yet
0x3f 0x00 target operating conditions have changed
0x3f 0x01 microcode has been changed
0x3f 0x02 changed operating definition
0x3f 0x03 inquiry data has changed
0x40 0x00 ram failure
0x40 nn diagnostic failure on component nn
0x41 0x00 data path failure
0x42 0x00 power-on or self-test failure
0x43 0x00 message error
0x44 0x00 internal target failure
0x45 0x00 select or reselect failure
0x46 0x00 unsuccessful soft reset
0x47 0x00 scsi parity error
0x48 0x00 initiator detected error message received
0x49 0x00 invalid message error
0x4a 0x00 command phase error
0x4b 0x00 data phase error
0x4c 0x00 logical unit failed self-configuration
0x4e 0x00 overlapped commands attempted
0x50 0x00 write append error
0x50 0x01 write append position error
0x50 0x02 position error related to timing
0x51 0x00 erase failure
0x52 0x00 cartridge fault
0x53 0x00 media load or eject failed
0x53 0x01 unload tape failure
0x53 0x02 medium removal prevented
0x54 0x00 scsi to host system interface failure
SCSI Additional Sense and Qualifier Codes (Continued)
Additional
Sense Code
Qualifier
Code
Description
