21
Combi HP thermostatic mixer shower
FITTING THE TAMPERPROOF FIXED HEAD -
EXPOSED
FITTING THE TAMPERPROOF FIXED
HEAD
(Exposed option only)
Complete the outlet pipework from the valve
and cut the pipe to required length.
Place the fixed head unit on top of the pipe
work and mark the position of the three fixing
holes (fig.54).
Drill and plug the holes using the plugs supplied.
Secure the pipe to the fixed head unit using the
compression nut and olive supplied (fig.55).
Secure the fixed head to the wall with the three
screws supplied (fig.56).
Screw on the adjustable showerhead. Make
sure the supplied flat sealing washer is in place
(fig.57).
Note: The showerhead must be screwed on
tight to make sure of a watertight connection.
Use a suitable tool if necessary.
Using the allen key supplied, lock the
showerhead in position by tightening the grub
screw (fig.58).
Fig.54
Fig.58
Fig.55
Fig.56 Fig.57
