Hewlett-Packard 2510G Manual

A SERVICE OF

next previous

6-24

Quality of Service (QoS): Managing Bandwidth More Effectively

Using QoS Types To Configure QoS for Outbound Traffic

For example, suppose you want to configure the following two DSCP policies

for packets received with the indicated DSCPs.

1. Determine whether the DSCPs already have priority assignments, which

could indicate use by existing applications. This is not a problem as long

as the configured priorities are acceptable for all applications using the

same DSCP. (Refer to the “Note On Changing a Priority Setting” on page

6-35. Also, a DSCP must have a priority configured before you can assign

any QoS types to use it.)

Figure 6-7. Display the Current DSCP-Map Configuration

Received

DSCP

Policy

DSCP

802.1p

Priority

Policy Name

(Optional)

001100 000010 6 Level 6

001101 000101 4 Level 4

The DSCPs for this

example have not yet

been assigned an

802.1p priority level.