Control panel
message
Description Recommended action
REPLACE FUSER
KIT
For help press ?
The fuser kit is at end of life. Press ? for help.
or
See Replacing the fuser and pickup roller
for more information.
REPLACE FUSER
KIT
alternates with
To continue press
the Select button on
the printer front
panel.
The fuser is near end of life and the
SUPPLIES LOW setting in SYSTEM
SETUP is set to STOP.
1. Order the fuser kit.
2. Press the Select button on the printer
front panel.to continue printing. Printing
can continue until REPLACE FUSER KIT
is reached.
or
Press ? for help.
REPLACE
SUPPLIES
alternates with
For status press the
Select button on the
printer front panel.
At least one supply item is out and needs
to be replaced and another supply item is
either out or low.
1. Press the Select button on the printer
front panel to identify which supplies
should be replaced.
2. Press ? for help.
REPLACE
SUPPLIES
alternates with
To continue press
the Select button on
the printer front
panel.
More than one supply item is low, and the
SUPPLIES LOW setting in SYSTEM
SETUP is set to STOP.
1. Press the Select button on the printer
front panel.to identify which supplies
should be ordered.
2. Order the identified supplies.
3. Press the Select button on the printer
front panel to continue printing.
REPLACE
TRANSFER KIT
For help press ?
The transfer unit is at end of life. Press ? for help.
or
See Replacing the transfer kit for more
information.
REPLACE
TRANSFER KIT
alternates with
To continue press
the Select button on
the printer front
panel.
The transfer unit is near end of life and the
SUPPLIES LOW setting in SYSTEM
SETUP is set to STOP.
1. Order the transfer kit.
2. Press the Select button on the printer
front panel to continue printing.
Request accepted
please wait
The printer has accepted a request to print
an internal page, but the current job must
finish printing before the internal page will
print.
No action necessary.
Restoring
factory settings
The printer is restoring factory settings. No action necessary.
Restoring... The printer is restoring settings. No action necessary.
Resetting Kit Count YES was selected in the RESET
SUPPLIES menu to reset the counts for
any of the supplies that cannot be detected
as new.
No action necessary.
36 Technology background information Software Technical Reference ENWW
